Skip to Content

Take, start and pause a job

A job in Matrise Field shows what it is, the asset, when it is due, who it is assigned to and its checklist. Its buttons work the same way as on the portal: one red button for the next step, others beside it, and the rest under More.

Read the job first

If the job needs a permit or is required by regulation, a Before you start box says so: "A permit is required before starting." or "This work is required by regulation", with the regulation named.

Take and start a job

  1. Open the job from My work.
  2. If nobody has it, tap Assign to me. It goes on your list.
  3. Tap Start work. The job is marked as in progress.

Put a job on hold

  1. Tap More, then Put on hold.
  2. Choose Why it is stopped: waiting for parts, access, a shutdown or a contractor, or other.
  3. Add anything under Anything to add.
  4. Tap Put on hold.

Resume a job

Tap Resume.

To see what each button does, tap the information button, What these buttons do.

Finish the job

  • Check and preventive jobs are finished by recording an inspection. See Record an inspection.
  • Other jobs are finished by logging work. See Log work.

Everything you do is saved on the phone first and sent when there is a signal.